Vehicle Control Module (VCM) Operation Record
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Activate the M-MDS and perform the following procedure.
- Press [Start] to start the vehicle identification.
- Press the [Toolbox] tab.
- Press the [Diagnosis] icon.
- Press [Operational records].
- Press [i-ACTIVSENSE].
- Press [Run] for [Reading Operation records of VCM].
- Display the VCM operation records according to the directions on the M-MDS screen.
- For the operation record content, refer to the [Vehicle Control Module (VCM) Operation Record] in the service highlights/technical information.