Rear Window Defogger/Glass Antenna Repair
- Clean the rear window defogger/glass antenna using isopropyl alcohol.
- Attach tape to both sides of the rear window defogger/glass antenna.
- Using a small brush or marking pen, apply silver paint.
- After 2-3 min, carefully remove the tape without damaging the applied area.CAUTION:
- Do not operate the rear window defogger until the paint is completely dry. It may cause other malfunctions if it is used before the paint is dry.
- Dry the repaired part according to the following procedure.
- When the room temperature is 25°C {77°F}, leave it as it is for 24 h.
- When a heat gun is used, dry with the 150°C {302°F} air for 30 min.