Front Ultrasonic Sensor Inspection
NOTE:
- The integrity of the front ultrasonic sensor cannot be determined from a single part. When inspecting the front ultrasonic sensor, perform the following procedure.
- Connect the M-MDS to the DLC-2.
- Perform the DTC inspection for the parking assist unit (ultrasonic) and verify if any DTCs related to the front ultrasonic sensor is detected. (See DTC INSPECTION
.)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [PARKING ASSIST UNIT (ULTRASONIC) (US)] .)
- If DTCs are not detected, repair the malfunctioning location according to the symptom troubleshooting. (See SYMPTOM TROUBLESHOOTING [PARKING ASSIST SYSTEM] .)