LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN Y) >> Boost Pressure Sensor Inspection >> Function Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Inspection

  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Display the PID INLET_PRES. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
  4. Compare the voltage and boost pressure indications for the PID INLET_PRES with the standard in the table indicated below.
    • If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
scientia non olet · About LEMON Manuals