Section 1 (Manual Transaxle - Overhaul [C66M-R])
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Mazda 6, 2018 Mazda 3, 2017 Mazda 6, 2017 Mazda 3, and 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- Precaution
- Transaxle Disassembly
- Transaxle Case And Clutch Housing Disassembly
- Shift Control Module Disassembly
- Shift Control Module Assembly
- Reverse Idler Gear Component Disassembly
- Reverse Idler Gear Component Inspection
- Reverse Idler Gear Component Assembly
- Primary Shaft Component PREINSPECTION
- Primary Shaft Component Disassembly
- Primary Shaft Component Inspection
- Primary Shaft Component Assembly
- Secondary Shaft Component PREINSPECTION
- Secondary Shaft Component Disassembly
- Secondary Shaft Component Inspection
- Secondary Shaft Component Assembly
- Notes
- Middle Cone Ring Assembly Note
- Synchronizer Ring (Secondary 1st Gear) Assembly Note
- Clutch Hub Assembly Note
- Gear Sleeve Assembly Note
- Secondary Shaft Assembly Note
- Clutch Hub Sleeve Assembly Note
- Synchronizer Key Assembly Note
- Synchronizer Ring (Secondary 2nd Gear) Assembly Note
- Secondary 2nd Gear Assembly Note
- Friction Damper (Secondary 2nd Gear) Assembly Note
- Secondary 5th Gear Assembly Note
- Secondary 6th Gear and Secondary 3rd Gear Assembly Note
- Secondary 4th Gear Assembly Note
- Tapered Roller Bearing Assembly Note
- Differential Backlash Adjustment
- Differential Disassembly
- Differential Assembly
- Bearing Preload Adjustment
- Transaxle Case And Clutch Housing Assembly
- Transaxle Assembly
- Transmission/Transaxle Technical Data
- Transmission/Transaxle SST