Advanced keyless entry system

NOTE:

There are three types of personalization procedures: Using the M-MDS, using the center display, and using the remote transmitter button.

ADVANCED KEYLESS ENTRY SYSTEM PERSONALIZATION FEATURES AND SETTING CONTENTS DESCRIPTION

Personalization features	Setting contents	Setting procedure
Advanced keyless entry system and push button start system functions can be disabled (disable).	Enable/Disable	M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE .)
The out-of-area (reception area) type auto lock function can be set.	OFF/ON	M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE .)
	OFF/ON	Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .)
The operation start time of the auto re-lock function can be changed.	30 seconds./60 seconds./90 seconds.	M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE .)
	30 seconds/60 seconds/90 seconds	Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .)
The keyless beeper volume can be adjusted.	OFF/Low/Medium/ High	M-MDS is used. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE .)
	OFF/Low/Medium/ High	Remote transmitter button is used for the setting. (See SECURITY AND LOCKS PERSONALIZATION FEATURES SETTING PROCEDURE .)
	OFF/Low/Medium/ High	Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .)
The setting content for the advanced keyless entry system can be returned to the initial value.	YES/NO	Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .)