Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PIDs APP1 and APP2. (See ON-BOARD DIAGNOSTIC TEST .) (See PCM INSPECTION .)
- Compare the voltage and opening angle indications for the PIDs APP1 and APP2 with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
Standard
| Condition | APP1 | APP2 | ||
|---|---|---|---|---|
| V | % | V | % | |
| Accelerator pedal released | Approx. 0.78 | Approx. 16 | Approx. 0.39 | Approx. 7.84 |
| Accelerator pedal depressed | Approx. 4.54 | Approx. 91 | Approx. 2.27 | Approx. 45.49 |