Fuel Pump Unit Removal/Installation: Notes
WARNING:
- Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the "FUEL LINE SAFETY PROCEDURE ", while referring to "BEFORE SERVICE PRECAUTION".
- A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before draining fuel, make sure to discharge static electricity by touching the vehicle body.
CAUTION:
- Disconnecting/connecting the quick release connector without cleaning it may cause damage to the fuel pipe and quick release connector. Always clean the quick release connector joint area before disconnecting/connecting using a cloth or soft brush, and make sure that it is free of foreign material.
- Complete the "BEFORE SERVICE PRECAUTION". (See BEFORE SERVICE PRECAUTION .)
- If the fuel gauge level indicates 3/4 or more, refer to the "FUEL DRAINING PROCEDURE" and drain the fuel. (See FUEL DRAINING PROCEDURE .)
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
- Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION .)
- Remove the service hole cover.
- Remove in the order indicated in the table.
2WD
COMPONENT DESCRIPTION1 fuel pump unit connector 2 quick release connector
(See QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION .)3 fuel pump cap
(See fuel pump cap removal note .)
(See fuel pump cap installation note .)4 fuel pump unit
(See fuel pump unit installation note .)5 packing
(See packing installation note .)AWD
COMPONENT DESCRIPTION1 Fuel pump unit connector 2 Quick release connector
(See QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION .)3 Fuel pump cap
(See Fuel Pump Cap Removal Note .)
(See Fuel Pump Cap Installation Note .)4 Quick release connector
(See QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION .)5 Fuel pump unit
(See Fuel Pump Unit Installation Note .)6 Packing
(See Packing Installation Note .) - Install in the reverse order of removal.
- Complete the "AFTER SERVICE PRECAUTION". (See AFTER SERVICE PRECAUTION .)