LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2021 >> CX-3 FWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Shift Mechanism >> Automatic Transaxle Shift Mechanism Removal/Installation >> Selector Cable Removal/Installation >> Selector Cable Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Selector Cable Adjustment

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  2. For vehicles without the electric parking brake, remove the following parts.
    1. Center console tray (See CENTER CONSOLE TRAY REMOVAL/INSTALLATION .)
    2. Shift bezel (See SHIFT BEZEL REMOVAL/INSTALLATION .)
    3. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)
    4. Selector lever knob (See Selector Lever Component Removal/Installation .)
    5. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
  3. For vehicles with the electric parking brake, remove the following parts.
    1. Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION .)
    2. Switch panel No. 2 (See SWITCH PANEL REMOVAL/INSTALLATION .)
    3. Selector lever knob (See Selector Lever Component Removal/Installation .)
    4. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
  4. Shift the selector lever to the P position.
  5. Pull out the safety lock in the direction of the arrow (1) shown in the figure, pull out the lock piece in the direction of the arrow (2) shown in the figure, and release the lock. (See SELECTOR CABLE (SELECTOR LEVER SIDE) INSTALLATION NOTE .)
    G11438231Courtesy of MAZDA MOTORS CORP.
  6. Set the manual shaft to the P position.
    G11438232Courtesy of MAZDA MOTORS CORP.
  7. Press in the lock piece in the direction of the arrow (1) shown in the figure, press in the safety lock in the direction of the arrow (2) shown in the figure, and lock it.
    G11438233Courtesy of MAZDA MOTORS CORP.
  8. Perform the procedure in the reverse order of Step  1 to  6 to install the removed part.
  9. Perform the selector lever inspection. (See SELECTOR LEVER INSPECTION .)
scientia non olet · About LEMON Manuals