Room light control system

NOTE:

There are two types of personalization procedures; one using the M-MDS and the other using the center display.

ROOM LIGHT CONTROL SYSTEM PERSONALIZATION FEATURES AND SETTING CONTENTS DESCRIPTION

Personalization features	Setting contents	Setting procedure
The front/rear map light illumination time after any door is opened can be changed. The cargo compartment light illumination time after the liftgate is opened can be changed.	30 minutes./60 minutes./10 minutes.	M-MDS is used. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE .)
	60 minutes/30 minutes/10 minutes	Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .)
The front/rear map light illumination time after all the doors are closed can be changed.	15 seconds./7.5 seconds./30 seconds./60 seconds.	M-MDS is used. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE .)
	60 seconds/30 seconds/15 seconds/7.5 seconds	Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .)
The ambient light brightness can be changed when the TNS (parking lights) are turned on.	Bright/Medium/Dark/Off	Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .)
Returns the setting content of the lighting system to the initial setting.	YES/NO	Center display is used for the setting. (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE .)