Power Window System Initialization Procedure
NOTE:
- If the following operations have been performed, the initial window setting is reset, and auto up/down operations are disabled. Therefore, reestablishing the initial setting is necessary.
- Negative battery terminal is disconnected.
- Power window main switch connector is disconnected.
- Power window system power supply fuse is removed.
- Power window sub-switch connector is disconnected.
- Switch the ignition ON (engine off).
- Press each power window main switch or power window sub-switch to fully open the door glass.
- Pull up and hold each power window main switch or power window sub-switch until the door glass is fully closed. Once fully closed, keep holding the switch up for approx. 2 s.