Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID ECT. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.0)] .) (See PCM INSPECTION .)
- Compare the voltage and temperature indications for the PID ECT with the standard in the table indicated below.
- If they do not match the standard, replace the PCM. (See PCM REMOVAL/INSTALLATION .)
- If they match the standard, perform the resistance inspection. (See RESISTANCE INSPECTION .)
Standard
| ECT | |
|---|---|
| V | °C {°F} |
| Approx. 3.10 | 20 {68} |
| Approx. 2.16 | 40 {104} |
| Approx. 1.40 | 60 {140} |
| Approx. 0.87 | 80 {176} |
| Approx. 0.54 | 100 {212} |