LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Cluster Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cluster Switch Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
  2. Remove the following parts:
    1. Driver-side front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    2. Driver-side front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    3. Driver-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    4. Passenger-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    5. Hood release lever (See HOOD RELEASE LEVER AND RELEASE CABLE REMOVAL/INSTALLATION [(US)] .)
    6. Driver-side lower panel (See LOWER PANEL REMOVAL/INSTALLATION [(US)] .)
  3. Disconnect the connectors.
    G13179360Courtesy of MAZDA MOTORS CORP.
  4. With the hooks pressed in the direction of arrows (1) shown in the figure, push out the cluster switch No. 1 in the direction of arrow (2) and remove it from the driver-side lower panel.
    G13179361Courtesy of MAZDA MOTORS CORP.
  5. With the hooks pressed in the direction of arrows (1) shown in the figure, push out the cluster switch No. 2 in the direction of arrow (2) and remove it from the driver-side lower panel.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals