Power Window SUBSWITCH Inspection: Notes
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
- Remove the power window subswitch. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
- Verify that the resistance between power window subswitch terminals B and D is as indicated in the table.
Switch Position Resistance (ohm) Terminal Auto Down 445.5-454.5 B-D Auto Up 683.1-696.9 Manual Up 1069.2-1090.8 - If not as indicated in the table, replace the power window subswitch. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)
- Verify that the continuity between the power window subswitch terminals C and D is as indicated in the table.
| Switch Position | Continuity Terminal |
|---|---|
| Manual Down | C-D |
- If not as indicated in the table, replace the power window subswitch. (See POWER WINDOW SUBSWITCH REMOVAL/INSTALLATION .)