Function Inspection
- Connect the M-MDS to the DLC-2.
- Start the engine.
- Display the PCM PID [FUEL_PRES]. (See PID/DATA MONITOR INSPECTION .)
- Compare the voltage and fuel value indications for the PID [FUEL_PRES] with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See Voltage Inspection .)
Standard
| FUEL_PRES | |
|---|---|
| V | MPa {kgf/cm2 , psi} |
| Approx. 1.4 | 10 {102, 1450} |