PID/DATA Monitor Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display PCM PID [IMRC_ACT] and PCM simulation item [IMRC_DSD] using the M-MDS. (See PID/DATA MONITOR TABLE [PCM (SKYACTIV-G (US))] .) (See PCM INSPECTION .)
- Verify that the PID [IMRC_ACT] value conforms to the simulation item [IMRC_DSD] value when the swirl control valve opening angle simulation item [IMRC_DSD] is driven using the simulation function.
- If they cannot be verified, replace the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-G (WITH EGR COOLER)] .)