LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> 3 Turbo >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN Y) >> Boost Pressure Sensor Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Boost Pressure Sensor Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
  2. Remove the air hose. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: Boost Pressure Sensor Components Location With Torque Specification - SKYACTIV-G VIN Y (US)
    G14580064Courtesy of MAZDA MOTORS CORP.
    BOOST PRESSURE SENSOR COMPONENT OPERATIONS

    Component No. Refer to
    1 Boost pressure sensor connector
    2 Hose
    3 Boost pressure sensor
scientia non olet · About LEMON Manuals