LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> 3 Turbo >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Shift Mechanism >> Not P Position Switch Inspection >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Not P Position Switch Inspection: Notes

NOTE:
  • The not P position switch is built into the selector lever component.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
  2. Remove the following parts:
    1. Selector lever knob (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION .)
    2. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
    3. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
    4. Cup holder (See CUP HOLDER REMOVAL/INSTALLATION .)
    5. Side wall (See SIDE WALL REMOVAL/INSTALLATION .)
    6. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION [(US)] .)
    7. Rear console bracket No. 1 (See REAR CONSOLE REMOVAL/INSTALLATION [(US)] .)
  3. Disconnect the selector lever component connector.
    G13176616Courtesy of MAZDA MOTORS CORP.
  4. Verify that the continuity between selector lever component terminals C and G.
    G14581185Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals