LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> CX-30 Select >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Windshield Removal >> Not Reusing Windshield
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Not Reusing Windshield

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
  2. Remove the following parts:
    1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
    2. Cowl grille (See COWL GRILLE REMOVAL/INSTALLATION .)
    3. Windshield wiper motor (See WINDSHIELD WIPER MOTOR AND LINK REMOVAL/INSTALLATION .)
    4. Front fender molding (See FRONT FENDER MOLDING REMOVAL/INSTALLATION .)
    5. Forward sensing camera (FSC) (with forward sensing camera (FSC)) (See FORWARD SENSING CAMERA (FSC) REMOVAL/INSTALLATION .)
    6. Rain sensor (See RAIN SENSOR REMOVAL/INSTALLATION .)
    7. Auto-dimming rearview mirror (with auto-dimming rearview mirror) (See AUTO-DIMMING REARVIEW MIRROR REMOVAL/INSTALLATION .)
    8. Rearview mirror (without auto-dimming rearview mirror) (See REARVIEW MIRROR REMOVAL/INSTALLATION .)
    9. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION [(US)] .)
    10. Sunvisor (See SUNVISOR REMOVAL/INSTALLATION .)
    11. Front map light (See FRONT MAP LIGHT REMOVAL/INSTALLATION [(US)] .)
    12. Assist handle (front) (See ASSIST HANDLE REMOVAL/INSTALLATION .)
    13. Sensor cover (See SENSOR COVER REMOVAL/INSTALLATION .)
  3. Set the headliner out of the way.
  4. Disconnect the windshield wiper de-icer connector. (with windshield wiper de-icer)
    G13560181Courtesy of MAZDA MOTORS CORP.
  5. Remove the windshield wiper de-icer wiring harness from the hooks. (with windshield wiper de-icer)
  6. Remove the wiring harness clip. (with windshield wiper de-icer)
  7. Apply protective tape along the edge of the body.
    NOTE:
    • Overlap and adhere the protective tape to the corners to prevent damage.
    G13560182Courtesy of MAZDA MOTORS CORP.
    WARNING:
    • Always wear gloves when using a utility knife. Using a utility knife with bare hands can cause injury.
  8. Using a utility knife, cut the windshield molding shown in the figure.
    G13560183Courtesy of MAZDA MOTORS CORP.
  9. Cut out the sealant all around the glass using a sealant remover.
    G13178819Courtesy of MAZDA MOTORS CORP.
  10. Remove the windshield.
scientia non olet · About LEMON Manuals