LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2023 >> CX-5 S Select >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> MAZDA Intelligent Drive Select (Mi-Drive) >> MAZDA Intelligent Drive Select (Mi-Drive) Switch Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

MAZDA Intelligent Drive Select (Mi-Drive) Switch Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the console side panel. (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION .)
  3. Remove the switch panel. (See SWITCH PANEL REMOVAL/INSTALLATION .)
  4. Remove the selector lever knob. (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION .)
  5. Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION .)
  6. Turn over the removed shift panel and remove the boots from the boots securing parts shown in the figure below.
    G15630242Courtesy of MAZDA MOTORS CORP.
  7. Remove in the order indicated in the table.
  8. Install in the reverse order of removal.
    G15630243Courtesy of MAZDA MOTORS CORP.
    MAZDA INTELLIGENT DRIVE SELECT SWITCH COMPONENT OPERATIONS

    Component No. Refer to
    1 Connector
    2 Screw
    3 Mi-Drive switch
scientia non olet · About LEMON Manuals