OEM General Information

Abbreviations
Electrical System
- Electrical Parts
  - Battery terminal
- Wiring Harness
  - Overview
  - Wiring color codes
- Connectors
- Terminals
  - Inspection
  - Replacement
- Sensors, Switches, and Relays
- Fuse
  - Replacement
- Viewing Orientation for Connectors
- Female Terminal Fitting Test Procedure
- Electrical Troubleshooting Tools
- Precautions Before Welding
- Ground Inspection And Disconnection/reconnection
Handling Spare Tire
- Remove the Spare Tire
- Install the Spare Tire
How To Use This Service Information
- Range of Topics
- Advisory Messages
- Symbols
- Service Procedure
  - Inspection, adjustment
  - Repair procedure
- Troubleshooting Procedure
- Procedures for Use
Identification Number Locations
- Vehicle Identification Number (VIN)
- Engine Identification Type/Number
  - SKYACTIV-G 2.5 (VIN M), (VIN Y)
Installation Of Radio System
Jacking Positions, Vehicle Lift (2 Supports) And Safety Stand (Rigid Rack) Positions
- Jacking Positions
- Vehicle Lift-up Positions
Pre-Delivery Inspection
- Refer To The Service Information For Detailed Adjustment Procedures
- Pre-Delivery Inspection Table
- Leave Engine Idling In Park Until Reaching Operating Temperature
- Turn Engine Off And raise Vehicle On Lift
  - ON hoist
- Lower Vehicle And Remove From Lift
Repair Connector Replacement/Wiring Harness Connection
- Repair Connector Replacement
  - Vehicle-side Connector Cutting
- Wiring Harness Connection
Sae Standards
Scheduled Maintenance [2022-2023MY]
- Scheduled Maintenance Table for U.S.A., Canada and Puerto Rico
Scheduled Maintenance [2021MY]
- Scheduled Maintenance Table for U.S.A., Canada and Puerto Rico
Scheduled Maintenance [2022MY]
- Scheduled Maintenance Table for U.S.A., Canada and Puerto Rico
Service Cautions
- Injury/damage Prevention Precautions
- Protection of the Vehicle
- Preparation of Tools and Measuring Equipment
- Special Service Tools
- Malfunction Diagnosis System
  - Notes
  - Connection to malfunction diagnosis system
- Oil Leakage Inspection
  - Notes
  - Using UV light (black light)
  - Not using UV light (black light)
- Negative Battery Terminal Disconnection/Connection
  - Notes
  - Required procedure after negative battery terminal disconnection/connection
- Switch the Power Supply Using the Push Button Start and Start the Engine
- Removal of Parts
- Control module configuration (initialization setting)
- Disassembly
- Inspection During Removal, Disassembly
- Arrangement of Parts
- Cleaning of Parts
- Reassembly
- Adjustment
- Rubber Parts and Tubing
- Hose Clamps
- Torque Formulas
- Vise
- SST
  - Notes
  - Example (SST List)
  - Example (In text)
- Emergency Engine Stop Operation
- Cautions on Chassis Dynamometer Use
- AWD inspection/service
  - Speedometer tester measurement
  - Brake tester measurement
  - Wheel balancer (on the vehicle balancer)
- Servicing on Vehicles with Electric Parking Brake
- Servicing on Vehicles with ABS/DSC
  - Notes
  - Cautions for vehicles with Mazda Radar Cruise Control (MRCC) system/Smart Brake Support (SBS)/Distance Recognition Support System (DRSS)/Smart City Brake Support (SCBS)
  - Rotating only front or rear wheels
  - Rotating all four wheels
Service Cautions For Vehicles With Telematics Communication System
- Notes
- Connected Vehicle Maintenance Mode
TIEDOWN Hook
- Vehicle Front and Rear Side
- Vehicle Underside
Towing
- Towing Description
Units
- Notes
- Conversion From SI Units
- Number of Digits for Converted Values
- Converted Value Rounding Off and Rounding Up/down
Vehicle Identification Number (VIN)
Vehicle Identification Number (VIN) Code