Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PIDs MAP_VOLT and MAP. (See PID/DATA MONITOR INSPECTION .)
- Compare the voltage and manifold absolute pressure indications for the PIDs MAP_VOLT and MAP with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
STANDARD SPECIFICATION
| MAP_VOLT | MAP | Remarks |
|---|---|---|
| V | kPa {kgf/cm2 , psi} | |
| Approx. 4.07 | 101 {1.03, 14.6} | Ignition switched ON (engine off) |
| Approx. 1.01 | 25 {0.25, 3.6} | Racing (engine speed is 2, 000 rpm) |
| Approx. 0.81 | 23 {0.23, 3.3} | Racing (engine speed is 4, 000 rpm) |