MAZDA Intelligent Drive Select (Mi-Drive) Switch Removal/Installation

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
2. Remove the selector lever knob. (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION .)
3. Remove the shift panel. (See SHIFT PANEL REMOVAL/INSTALLATION .)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.

Courtesy of MAZDA MOTORS CORP.

MAZDA INTELLIGENT DRIVE SELECT (MI-DRIVE) SWITCH COMPONENT OPERATIONS

Component No.	Refer to
1	Mi-Drive switch connector
2	Screw
3	Mi-Drive switch