PID/DATA Monitor Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Verify that the clutch stroke value (PCM PID: CLTCH_PEDAL_POS) input from the clutch stroke sensor is within the standard when the clutch pedal is depressed. (Refer to [PID/DATA MONITOR INSPECTION
] in the service information.)
- If not within the specification, replace the clutch master cylinder. (See CLUTCH MASTER CYLINDER REMOVAL/INSTALLATION [C66M-R] .)
CLUTCH STROKE VALUE SPECIFICATIONS (STANDARD)
| Condition | Clutch stroke value |
|---|---|
| % | |
| Clutch pedal depressed | 0-8 |
| Clutch pedal released | 92-100 |