Function inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PCM PID [IAT2]. (Refer to [PID/DATA MONITOR INSPECTION ] in the service information.)
- Compare the voltage and temperature indications for the PID [IAT2] with the standard in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See RESISTANCE INSPECTION .)
INTAKE AIR TEMPERATURE SPECIFICATIONS (STANDARD)
| IAT2 | |
|---|---|
| V | °C {°F} |
| Approx. 3.57 | 20 {68} |
| Approx. 2.70 | 40 {104} |
| Approx. 1.87 | 60 {140} |