LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2024 >> 3 S >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN M) >> Throttle Position (TP) Sensor Inspection >> Function Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Function Inspection

  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Display the PCM PIDs [TP1] and [TP2]. (Refer to [PID/DATA MONITOR INSPECTION ] in the service information.)
  4. Compare the voltage and opening angle indications for the PIDs [TP1] and [TP2] with the standard in the table indicated below.
    • If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
      THROTTLE POSITION SENSOR SPECIFICATIONS (STANDARD)

      Condition TP1 TP2
      V % V %
      Accelerator pedal released Approx. 1.11 Approx. 22 Approx. 3.92 Approx. 22
      Accelerator pedal depressed Approx. 4.59 Approx. 92 Approx. 0.41 Approx. 92
scientia non olet · About LEMON Manuals