Reading DTC Detection Records Of Pcm/ECM: Notes
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off or on)/main power ON (READY off or on).
- Activate the M-MDS and perform the following procedure.
- Press [Start] to start the vehicle identification.
- Press the [Toolbox] tab.
- Press the [Diagnosis] icon.
- Press [Operational records].
- Press [ENGINE].
- Press [Reading DTC detection records of PCM] (except e-SKYACTIV PHEV)/[Reading DTC detection records of ECM] (e-SKYACTIV PHEV).
- Verify the record of operation according to the directions on the screen.