How To Use

If the driver reports that the alert operated or didn't operate, explain according to the following procedure and perform the necessary servicing.
The following table indicates the time sequence combinations of the operation record status numbers that may be stored and the results of the analysis and servicing performed. Identify the following records from the operation history records displayed in the M-MDS.
- Records (or absence of records) that are thought to be from driver's reported time
- If there is no record that is thought to be from time of driver's report, most recent record prior to time of report
- Earliest record since time of driver's report
Only [9] is an operation record status number stored as a record of the reported time because the alert start timing is when the ignition/main power is switched from ON or ACC to OFF.
Select the analysis results appropriate to the driver's report from the time sequence combination of operation record status numbers in the identified records.
If there are multiple combinations of time sequences of operation record status numbers, select the analysis results for each.

-: Not applicable

RESULT DESCRIPTION

Operation record item number			Driver's reported content
Newest record before reported time	Record thought to be reported time	Earliest record since reported time	Alert not operated	Alert operated
1	-	ignore (Ignored record: 1, 3, 4, 5, 6, 8)	Explanation There is a record of the personalization setting being set to [Off] before the reported time, but then there is no record of a rear seat door being opened after the personalization setting was changed back to [Interior Notification] before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Personalization setting was turned [Off] or mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage.	Explanation There is a record of the personalization setting being set to [Off] before the reported time, but then there is no record of a rear seat door being opened after the personalization setting was changed back to [Interior Notification] before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Accordingly, the alert did not operate and there was also no operation record.
2	-	ignore (Ignored record: 1, 3, 4, 5, 6, 8)	Explanation There is a record of the rear seat alert temporarily stopped by operating the INFO switch before the reported time, but there is no record of a rear seat door being opened after the alert was stopped before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Rear seat alert was temporarily stopped or mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage.	Explanation There is a record of the rear seat alert temporarily stopped by operating the INFO switch before the reported time, but there is no record of a rear seat door being opened after the alert was stopped before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Accordingly, the alert did not operate and there was also no operation record.
3	-	ignore (Ignored record: 1, 3, 4, 5, 6, 8)	Explanation There is a record of a rear seat alert malfunction prior to the reported time, but then there is no record of a rear seat door being opened after the malfunction was repaired before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Rear seat alert malfunctioned or mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage. Inspect/repair the malfunctioning location according to the service information.	Explanation There is a record of a rear seat alert malfunction prior to the reported time, but then there is no record of a rear seat door being opened after the malfunction was repaired before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Accordingly, the alert did not operate and there was also no operation record. Procedure Inspect/repair the malfunctioning location according to the service information.
4	-	ignore (Ignored record: 1, 3, 4, 5, 6, 8)	Explanation There is a record of a ROOM fuse blowing before the reported time, but then there is no record of a rear seat door being opened after the ROOM fuse was replaced before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Blown ROOM fuse or mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage. Inspect/repair the malfunctioning location according to the service information.	Explanation There is a record of a ROOM fuse blowing before the reported time, but then there is no record of a rear seat door being opened after the ROOM fuse was replaced before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Accordingly, the alert did not operate and there was also no operation record. Procedure Inspect/repair the malfunctioning location according to the service information.
5	-	ignore (Ignored record: 1, 3, 4, 5, 6, 8)	Explanation There is a record of a decreased battery/lead-acid battery charge amount before the reported time, but then there is no record of a rear seat door being opened after the battery/lead-acid battery charge amount recovered by the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Battery/lead-acid battery charge amount decreased or mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage.	Explanation There is a record of a decreased battery/lead-acid battery charge amount before the reported time, but then there is no record of a rear seat door being opened after the battery/lead-acid battery charge amount recovered by the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Accordingly, the alert did not operate and there was also no operation record. Procedure Refer to the owner's manual to verify the correct usage.
6	-	ignore (Ignored record: 1, 3, 4, 5, 6, 8)	Explanation There is a record of the body control module (BCM) resetting before the reported time, but then there is no record of a rear seat door being opened before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Body control module (BCM) was reset or misused due to battery/lead-acid battery connection or other power system factor is inferred. Procedure Refer to the owner's manual to verify the correct usage. Inspect/repair the malfunctioning location according to the service information.	Explanation There is a record of the body control module (BCM) resetting before the reported time, but then there is no record of a rear seat door being opened before the reported time. (Indicates that the system determined there are no occupants or luggage on the rear seats.) Accordingly, the alert did not operate and there was also no operation record. Procedure Inspect/repair the malfunctioning location according to the service information.
7	-	ignore (Ignored record: 1, 3, 4, 5, 6, 8)	Explanation There is a record of the engine not starting within approx. 10 min of closing the rear seat doors before the reported time, but then there is no record of a rear seat door being opened before the reported time. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded or not loaded.) Mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage.	Explanation There is a record of the engine not starting within approx. 10 min of closing the rear seat doors before the reported time, but then there is no record of a rear seat door being opened before the reported time. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded or not loaded.) Accordingly, the alert did not operate and there was also no operation record.
8	-	7 (Ignored record: 1, 2, 3, 4, 5, 6, 9)	Explanation There is a record of a rear seat door being opened before the reported time, but then the engine was not started within approx. 10 min after the rear seat door was closed after the reported time. (Indicates that the system determined that no occupants or luggage were placed on the rear seats.) Mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage.	Explanation There is a record of a rear seat door being opened before the reported time, but then the engine was not started within approx. 10 min after the rear seat door was closed after the reported time. (Indicates that the system determined that no occupants or luggage were placed on the rear seats.) Accordingly, the alert did not operate and there was also no operation record.
8	-	- (Ignored record: 1, 2, 3, 4, 5, 6, 9)	Explanation There is a record of a rear door being opened before the reported time, but then there is no record of the alert operating at the reported time. (Indicates that the system determined that no occupants or luggage were placed on the rear seats.) Mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage.	Explanation There is a record of a rear door being opened before the reported time, but then there is no record of the alert operating at the reported time. (Indicates that the system determined that no occupants or luggage were placed on the rear seats.) Accordingly, the alert did not operate and there was also no operation record.
9	-	7 (Ignored record: 1, 2, 3, 4, 5, 6, 9)	Remote engine start system operation status recorded before reported time is operating Explanation There is a record of the alert not operating because the remote engine start system was used before the reported time, but then the engine was not started within approx. 10 min after the rear seat doors were closed after the reported time. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded.) Mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage. Remote engine start system operation status recorded before reported time is stopped Explanation There is a record of the alert operating normally before the reported time, but then the engine was not started within approx. 10 min after a rear seat door was closed after the reported time. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded.) Mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage.	Remote engine start system operation status recorded before reported time is operating Explanation There is a record of the alert not operating because the remote engine start system was used before the reported time, but then the engine was not started within approx. 10 min after the rear seat doors were closed after the reported time. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded.) Accordingly, the alert did not operate and there was also no operation record. Remote engine start system operation status recorded before reported time is stopped Explanation There is a record of the alert operating normally before the reported time, but then the engine was not started within approx. 10 min after a rear seat door was closed after the reported time. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded.) Accordingly, the alert did not operate and there was also no operation record.
9	-	- (Ignored record: 1, 2, 3, 4, 5, 6, 9)	Remote engine start system operation status recorded before reported time is operating Explanation There is a record that the alert did not operate because the remote engine start system was used before the reported time. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded.) Mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage. Remote engine start system operation status recorded before reported time is stopped Explanation There is a record of a normal alert operation before the reported time, but no record of an alert operation at the reported time afterwards. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded.) Mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage.	Remote engine start system operation status recorded before reported time is operating Explanation There is a record that the alert did not operate because the remote engine start system was used before the reported time, but there is no record of the alert operating at the reported time afterwards. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded.) Accordingly, the alert did not operate and there was also no operation record. Remote engine start system operation status recorded before reported time is stopped Explanation There is a record of a normal alert operation before the reported time, but no record of an alert operation at the reported time afterwards. (Indicates that the system determined that the rear seat occupants and luggage have been unloaded.) Accordingly, the alert did not operate and there was also no operation record.
ignore (Ignored record: 8, 9)	9	ignore (Ignored record: 1, 2, 3, 4, 5, 6, 7, 9)	Remote engine start system operation status for recording reported time is operating Explanation There is a record of the alert not operating due to the use of the remote engine start system at the reported time. (Alert does not operate while remote engine start system is being used.) Procedure Refer to the owner's manual to verify the correct usage. Remote engine start system operation status recording reported time is stopped Explanation There is a record of the normal operation of the alert at the reported time. The following conditions are inferred. Unaware that the alert operated normally. The remote engine start system alert could not be displayed because other alerts were prioritized. The alert operated normally, but could not be displayed because the output system (instrument cluster) was malfunctioning. Procedure Verify if the alert operates normally.	Remote engine start system operation status for recording reported time is operating Explanation There is a record of the alert not operating due to the use of the remote engine start system at the reported time. (Alert does not operate while remote engine start system is being used.) Remote engine start system operation status recording reported time is stopped Explanation There is a record of the normal operation of the alert at the reported time. Mistaken usage is inferred. Procedure Refer to the owner's manual to verify the correct usage.