Reading Operation Records Of VCM: Notes

1. Connect the M-MDS to the DLC-2.
2. Switch the ignition ON (engine off or on)/main power ON (READY off or on).
3. Activate the M-MDS and perform the following procedure.
   1. Press [Start] to start the vehicle identification.
   2. Press the [Toolbox] tab.
   3. Press the [Diagnosis] icon.
   4. Press [Operational records].
   5. Press [i-ACTIVSENSE].
   6. Press [Reading Operation records of VCM].
4. Verify the record of operation according to the directions on the screen.