Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PCM PIDs [APP1] and [APP2]. (See PID/DATA MONITOR INSPECTION .) (See PID/DATA MONITOR TABLE [PCM (SKYACTIV-G VIN Y)] .)
- Compare the voltage and opening angle indications for the PIDs [APP1] and [APP2] with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
STANDARD SPECIFICATION
| Condition/ | APP1 | APP2 | ||
|---|---|---|---|---|
| V | % | V | % | |
| Accelerator pedal released | Approx. 0.78 | Approx. 15.69 | Approx. 2.29 | Approx. 8.24 |
| Accelerator pedal depressed | Approx. 4.55 | Approx. 90.98 | Approx. 0.39 | Approx. 84.31 |