Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PCM PIDs [MAP_VOLT] and [MAP]. (See PID/DATA MONITOR INSPECTION .) (See PID/DATA MONITOR TABLE [PCM (SKYACTIV-G VIN Y)] .)
- Compare the voltage and manifold absolute pressure indications for the PIDs [MAP_VOLT] and [MAP] with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
STANDARD SPECIFICATION
| MAP_VOLT | MAP | Remarks |
|---|---|---|
| V | kPa {kgf/cm2 , psi} | |
| Approx. 0.73 | 32 {0.33, 4.6} | Idle |
| Approx. 0.64 | 27 {0.28, 3.9} | Racing (engine speed is 2, 000 rpm) |
| Approx. 0.68 | 28 {0.29, 4.1} | Racing (engine speed is 4, 000 rpm) |