Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PCM PIDs [TP1] and [TP2]. (See PID/DATA MONITOR INSPECTION .) (See PID/DATA MONITOR TABLE [PCM (SKYACTIV-G VIN Y)] .)
- Compare the voltage and opening angle indications for the PIDs [TP1] and [TP2] with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
STANDARD SPECIFICATION
| Condition/ | TP1 | TP2 | ||
|---|---|---|---|---|
| V | % | V | % | |
| Accelerator pedal released | Approx. 1.10 | Approx. 21.96 | Approx. 3.89 | Approx. 22.35 |
| Accelerator pedal depressed | Approx. 4.59 | Approx. 81.76 | Approx. 0.42 | Approx. 91.37 |