LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2024 >> CX-50 S Select >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Symptom Troubleshooting - I-Stop >> Engine Does Not Restart >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Does Not Restart: Notes

ENGINE DOES NOT RESTART (SKYACTIV-G VIN Y) DESCRIPTION AND POSSIBLE CAUSE

Troubleshooting item Engine does not restart
Description
  • The engine does not restart after the engine was stopped by the i-stop control.
Possible cause
  • DTCs are stored in the following modules.
    • PCM
    • TCM
    • DSC HU/Control Module
    • Dash-electrical supply unit
    • Body control module (BCM)
  • Engine does not crank when engine restart is initiated
    • Engine starting system malfunction
  • i-stop (engine stop control) permit conditions are not met due to either of the following causes:
    • Driver operation
    • Environment (problem other than with vehicle)
    • i-stop related part malfunction
    NOTE:
    • PIDs related to i-stop can be displayed in a list using the M-MDS data monitor diagnostic function.
    • If the engine is stopped by the i-stop control while the following data monitor items on the M-MDS are being viewed, the data monitor items may no longer be displayed.
      • ACC_LON_C
      • BRK_FLD_PRES
      • BRK_PEDAL_SW
      • WSPD_SEN_L/F
      • WSPD_SEN_L/R
      • WSPD_SEN_R/F
      • WSPD_SEN_R/R
System wiring diagram
  • Not applicable
Connector diagram
  • Not applicable