Electronically Controlled Brake System (Service Information)
- AUTOHOLD Switch Inspection
- AUTOHOLD Switch Removal/Installation
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Select Lever Knob
- Remove Front Console
- Remove Shift Panel
- Remove Electric Parking Brake Switch
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Brake Fluid Pressure Sensor Inspection
- Electronically Controlled Brake System Location Index
- Electronically Controlled Brake Unit Inspection
- Electronically Controlled Brake Unit Related Parts Sensor Initialization Procedure
- Electronically Controlled Brake Unit Removal/Installation [L.H.D.]
- Front Abs Wheel-Speed Sensor Inspection
- Front Abs Wheel-Speed Sensor Removal/Installation
- Hill Descent Control (HDC) Switch Inspection
- Hill Descent Control (HDC) Switch Removal/Installation
- Rear Abs Wheel-Speed Sensor Inspection
- Rear Abs Wheel-Speed Sensor Removal/Installation
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Trunk Covering
- Remove Trunk Board (Rear)
- Remove Trunk End Trim
- Remove Third-row Seat Cushion
- Remove Third-row Seat Back Component
- Remove Trunk side upper trim (LH)
- Remove Rear Scuff Plate (LH)
- Remove Trunk Side Trim Component (LH)
- Remove Rear Tires (LH)
- Remove Rear Tires (RH)
- Remove Rear ABS Wheel-Speed Sensor
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- TCS Off Switch Inspection
- TCS Off Switch Removal/Installation
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Driver Side Front Scuff Plate
- Remove Front Side Trim (Left Side)
- Remove Driver Side Decoration Panel
- Remove Passenger Side Decoration Panel
- Remove Driver Side Lower Panel
- Remove Cluster Switch No. 1
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function