Section 14 (Conventional Brake System)
WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
- Brake Fluid Air Bleeding
- Brake Fluid Inspection
- Brake Fluid Level Sensor Inspection
- Brake Fluid Replacement [DSC HU/Cm]
- Brake Fluid Replacement [Electronically Controlled Brake Unit]
- Brake Pedal Inspection
- Brake Pedal Removal/Installation
- Brake Switch Inspection
- Conventional Brake System Location Index
- Front Brake Caliper Disassembly/Assembly
- Front Brake Caliper Removal/Installation
- Front Brake Disc Pad Removal/Installation
- Front Brake Disc Removal/Installation
- Front Brake Hose Removal/Installation
- Front Brake Inspection
- Front Brake Mounting Support Removal/Installation
- Maintenance Mode
- Master Cylinder Removal/Installation
- Power Brake Unit Inspection
- Power Brake Unit Removal/Installation
- Rear Brake Caliper Disassembly/Assembly
- Rear Brake Caliper Removal/Installation
- Rear Brake Disc Pad Removal/Installation
- Rear Brake Disc Removal/Installation
- Rear Brake Hose Removal/Installation
- Rear Brake Inspection
- Brake Judder Repair Hints
- Description
- Steering wheel vibration
- Floor vibration
- Brake pedal vibration
- Due to an excessive runout (side-to-side wobble) of the disc plate, the thickness of the disc plate is uneven
- The disc plate is deformed by heat
- Due to corrosion, the thickness and friction coefficient of the disc plate change
- Inspection and repair procedure
- Lateral runout inspection
- Thickness variation inspection
- Disc Plate Thickness Inspection
- Disc Pad Thickness Inspection
- Brake Judder Repair Hints
- Rear Brake Mounting Support Removal/Installation
- Vacuum Hose Removal/Installation (VIN M)
- Vacuum Hose Removal/Installation (VIN Y)
- Vacuum Line Inspection (VIN M)
- Vacuum Line Inspection (VIN Y)
- Vacuum Pump Inspection
- Vacuum Pump Removal/Installation (VIN M)
- Vacuum Pump Removal/Installation (VIN Y)