LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2025 >> CX-5 S Select >> Repair and Diagnosis >> Electrical >> Charging Systems >> Power Systems >> Front Accessory Socket Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Accessory Socket Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION .)
    2. Switch panel (See SWITCH PANEL REMOVAL/INSTALLATION .)
    3. Selector lever knob (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION .)
    4. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
    5. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
  3. Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure below.
    G13115500Courtesy of MACK TRUCKS, INC.
  4. While pressing the cap tab in the direction of arrow (1) shown in the figure below, push out the front accessory socket in the direction of arrow (2) to detach the cap tab from the socket.
    G13115501Courtesy of MACK TRUCKS, INC.
  5. Pull the front accessory socket in the direction of the arrow shown in the figure below and remove it.
    G13115502Courtesy of MACK TRUCKS, INC.
  6. While pressing the cap tabs in the direction of arrows (1) shown in the figure below, press the cap in the direction of arrow (2) to detach the cap tabs from the front console box.
    G13115503Courtesy of MACK TRUCKS, INC.
  7. Remove the cap.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals