Function inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID ECT. (See ON-BOARD DIAGNOSTIC TEST [PCM (VIN L (WITHOUT CYLINDER DEACTIVATION))] .) (See PCM INSPECTION [VIN L (WITHOUT CYLINDER DEACTIVATION)] .)
- Compare the voltage and temperature indications for the PID ECT with the standard in the table indicated below.
- If they do not match the standard, replace the PCM. (See PCM REMOVAL/INSTALLATION [VIN M (WITH CYLINDER DEACTIVATION)] .)
- If they match the standard, perform the resistance inspection. (See Resistance inspection .)
STANDARD SPECIFICATIONECT V °C {°F} Approx. 3.10 20 {68} Approx. 2.16 40 {104} Approx. 1.40 60 {140} Approx. 0.87 80 {176} Approx. 0.54 100 {212}