Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PID IAT2. (See ON-BOARD DIAGNOSTIC TEST [PCM (VIN L (WITHOUT CYLINDER DEACTIVATION))] .) (See PCM INSPECTION [VIN L (WITHOUT CYLINDER DEACTIVATION)] .)
- Compare the voltage and temperature indications for the PID IAT2 with the standard in the table indicated below.
- If they do not match the standard, perform the resistance inspection. (See Resistance inspection .)
STANDARD SPECIFICATIONIAT2 V °C {°F} Approx. 3.57 20 {68} Approx. 2.70 40 {104} Approx. 1.87 60 {140}