Function Inspection

Connect the M-MDS to the DLC-2.
Switch the ignition ON (engine off).
Display the PID FUEL_PRES. (See ON-BOARD DIAGNOSTIC TEST [PCM (VIN M)] .) (See PCM INSPECTION (VIN M) .)
Compare the voltage and fuel value indications for the PID FUEL_PRES with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See Voltage Inspection .)

STANDARD SPECIFICATION

FUEL_PRES
V	MPa {kgf/cm² , psi}
Approx. 1.4	10 {102, 1450}