Section 240 (Lighting System)
WARNING: This page is about a different car, the 2024 Mazda CX-90. However, it is still accessible from the selected car via links, so may be relevant.
- Auto Leveling Control Module Inspection
- Auto Leveling Control Module Removal/Installation
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Passenger Side Front Scuff Plate
- Remove Front Side Trim (Right Side)
- Remove Glove Compartment
- Remove Passenger Side Decoration Panel
- Remove Dashboard Under Cover
- Without passenger-side knee air bag module
- With passenger-side knee air bag module
- Remove Passenger Side Lower Panel
- Remove Driver Monitoring Camera Unit
- Remove Auto Leveling Control Module/Adaptive Front Lighting System (AFS) Control Module/Adaptive LED Headlights Control Module
- Install in Reverse Order of Removal
- Perform Configuration (If Parts Are Replaced)
- Perform Headlight Auto Leveling System Initial Setting
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Auto Light Sensor Inspection
- Auto Light Sensor Removal/Installation
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Sensor Cover
- Remove Indicator Unit
- Remove Rain Sensor, Auto-Light Sensor, Humidity Sensor, And Solar Radiation Sensor
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Cargo Compartment Light Inspection
- Cargo Compartment Light Removal/Installation
- Cargo Compartment Light Removal/Installation [001]
- Cargo Compartment Light Removal/Installation [002]
- D-code
- Verify Viewing Information
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Liftgate Upper Trim
- Remove Driver Side Liftgate Side Trim
- Remove Passenger Side Liftgate Side Trim
- Remove Liftgate Recess
- Remove Liftgate-Side Door Lock Switch/Power Liftgate Rear Switch
- Remove Liftgate Lower Trim
- Remove Cargo Compartment Light (Liftgate Side)
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Front Combination Light Inspection
- Front Combination Light Removal/Installation
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Driver Side Edge Rubber
- Remove Passenger Side Edge Rubber
- Remove Driver Side Front Over Fender Lower
- Remove Driver Side Front Over Fender Upper
- Remove Passenger Side Front Over Fender Lower
- Remove Passenger Side Front Over Fender Upper
- Remove Latch Cover Component
- Remove the front bumper component
- Remove Driver Side Front Combination Light
- Remove Passenger Side Front Combination Light
- Install in Reverse Order of Removal
- Perform Configuration (If Parts Are Replaced)
- Adjust Headlight Aiming
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Perform 360° View Monitor System Aiming
- Perform Radar Sensor (Front) Aiming (Without Radar Sensor (Front Side))
- Simultaneously Aim Radar Sensor (Front) And (Front Side) (With Radar Sensor (Front Side))
- Perform Radar Sensor (Front Side) Aiming
- Front Map Light Inspection
- Front Map Light Removal/Installation
- Front Turn Light Removal/Installation
- Front Turn Light/Parking Light Inspection
- Hazard Warning Switch Inspection
- Hazard Warning Switch Removal/Installation
- Headlight Aiming
- Headlight Auto Leveling System Initialization
- High-Mount Brake Light Inspection
- High-Mount Brake Light Removal/Installation
- License Plate Light Inspection
- License Plate Light Removal/Installation
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Liftgate Upper Trim
- Remove Driver Side Liftgate Side Trim
- Remove Passenger Side Liftgate Side Trim
- Remove Liftgate Recess
- Remove Liftgate-Side Door Lock Switch/Power Liftgate Rear Switch
- Remove Liftgate Lower Trim
- Remove Rear Finisher
- Remove License Plate Light
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Perform 360° View Monitor System Aiming
- Liftgate Light Inspection
- Liftgate Light Removal/Installation
- Light Switch Inspection [L.H.D.]
- Light Switch Removal/Installation [L.H.D.]
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Remove Driver Side Air Bag Module
- Remove Steering Wheel
- Remove Upper Column Cover
- Remove Lower Column Cover
- Remove Clock Spring
- Remove Wiper And Washer Switch
- Remove Light Switch
- Install in Reverse Order of Removal
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Lighting Systems Location Index [L.H.D.]
- Rear Combination Light Inspection
- Rear Combination Light Removal/Installation
- Rear Map Light Inspection
- Rear Map Light Removal/Installation
- Rear Map Light Removal/Installation [001]
- Rear Map Light Removal/Installation [002]
- Side Turn Light Inspection
- Side Turn Light Removal/Installation
- D-code
- Remove Cover Assembly (Passenger's Side)
- Disconnect Negative Lead-Acid Battery Terminal
- Driver's Side Remove the outer mirror glass
- Front Passenger's Side Remove the outer mirror glass
- Remove Driver Side Upper Outer Mirror Garnish
- Remove Passenger Side Upper Outer Mirror Garnish
- Remove Driver Side Lower Outer Mirror Garnish
- Remove Passenger Side Lower Outer Mirror Garnish
- Remove Driver-side Side Turn Light
- Remove Passenger-side Side Turn Light
- Perform Power Liftgate Initialization
- Initialize Power Outer Mirror Retract/Return Function
- Perform 360° View Monitor System Aiming
- Steering Angle Sensor Inspection
- Vanity Mirror Illumination Inspection
- Vanity Mirror Illumination Removal/Installation