LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2025 >> CX-5 S >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN L) >> Camshaft Position (CMP) Sensor Removal/Installation >> Intake CMP Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake CMP Sensor

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [VIN L (WITHOUT CYLINDER DEACTIVATION)] .)
  3. Remove the intake manifold. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [VIN L (WITHOUT CYLINDER DEACTIVATION)] .)
  4. Disconnect the intake CMP sensor connector.
  5. Remove the intake CMP sensor.
    Fig 1: Intake CMP Sensor Bolt With Torque Specification
    G16328308Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals