Function Inspection

Connect the M-MDS to the DLC-2.
Switch the ignition ON (engine off).
Display the PID FUEL_PRES. (See ON-BOARD DIAGNOSTIC TEST [PCM (VIN L (WITHOUT CYLINDER DEACTIVATION))] .) (See PCM INSPECTION [VIN L (WITHOUT CYLINDER DEACTIVATION)] .)

Compare the voltage and fuel value indications for the PID FUEL_PRES with the standard in the table indicated below.

If they do not match the standard, perform the voltage inspection. (See Voltage Inspection .)

STANDARD SPECIFICATION (WITHOUT COOLANT CONTROL VALVE)

FUEL_PRES
V	MPa {kgf/cm² , psi}
Approx. 0.9	3.0 {31, 435}

STANDARD SPECIFICATION (WITH COOLANT CONTROL VALVE)

FUEL_PRES
V	MPa {kgf/cm² , psi}
Approx. 1.4	10 {102, 1450}