Function Inspection
- Connect the M-MDS to the DLC-2.
- Switch the ignition ON (engine off).
- Display the PIDs MAP_V and MAP. (See ON-BOARD DIAGNOSTIC TEST [PCM (VIN L (WITHOUT CYLINDER DEACTIVATION))] .) (See PCM INSPECTION [VIN L (WITHOUT CYLINDER DEACTIVATION)] .)
- Compare the voltage and manifold absolute pressure indications for the PIDs MAP_V and MAP with the standard in the table indicated below.
- If they do not match the standard, perform the voltage inspection. (See Voltage Inspection .)
STANDARD SPECIFICATIONMAP_V MAP Remarks V kPa {kgf/cm2 , psi} Approx. 4.04 100 {1.02, 14.5} Ignition switched ON (engine off) Approx. 1.40 35 {0.36, 5.1} Idle (after warm up) Approx. 1.01 26 {0.27, 3.8} Racing (Engine speed: 2, 000 rpm)