LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 1991 >> 350SD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> EZL Electronic Ignition Checks >> Crankshaft Position Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor

Disconnect crankshaft position sensor harness connector plug (Green wire) from EZL ignition module. Ensure resistance of sensor is 680-1200 ohms. If resistance is not as specified, replace crankshaft position sensor.

NOTE: For all other ignition tests, see appropriate G - TEST W/ CODES and I - SYS/COMP TESTS articles in the ENGINE PERFORMANCE section.