Electrical System Tests (Section 23)

NOTE: For aid in using diagnostic charts, see USING DIAGNOSTIC CHARTS .

NOTE: On test steps 1.2-1.3 and 2.1-2.2 only, turn igntion off. Remove base module (N16/1) and connect socket box with contact module 1 and contact box.

Fig 1: Electrical System Tests - Section 23 (Steps 1.0-2.2)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Electrical System Tests - Section 23 (Steps 3.0-7.2)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.