Fault Code Definition

After identifying malfunctioning component or system, see appropriate FAULT CODE DIAGNOSIS charts under DIAGNOSTIC TESTS .

Loose connections are stored if they occur several times over a certain time period. Fault codes caused by loose connections appear as stored fault codes and never as current fault codes.

NOTE: Generic scan tool will not identify all possible fault codes. It is recommended to use Hand Held Tester (HHT) for diagnosis.

NOTE: If no fault codes are displayed, there is no malfunction.

DIAGNOSTIC TROUBLE CODE LIST

HHT Code

Generic Scan Tool Code

Component and/or System

Test/Remedy

P0105

Pressure Sensor

FAULT CODE DIAGNOSIS P0110/P0111 & P0105 (STEP 5.1-6.1)

P0110

P0111

IAT Sensor

FAULT CODE DIAGNOSIS P0115 & P0110/P0111 (STEP 4.1-5.0)

P0115

ECT Sensor

FAULT CODE DIAGNOSIS P1610 & P0115 (STEP 3.0-4.0)

P0180

P0181

Fuel Temperature Sensor

FAULT CODE DIAGNOSIS P0180/P0181 (STEP 23.0-24.0)

P0400

EGR, Pressure Control Or Intake Manifold Press.

FAULT CODE DIAGNOSIS P0400 & P1470/P0120 (STEP 31.0-32.0)

P0500

VSSP0600

Fault code P0600 can be displayed even if no malfunction is present. CAN Data Bus

FAULT CODE DIAGNOSIS P1520 & P0500 (STEP 14.0-15.0)

P0703

N/A

Stop Light Switch

FAULT CODE DIAGNOSIS P0703 (STEP 12.0-12.2)

P1105

P0106

Atmospheric Pressure Sensor In Control Module

P1220

P0200

Fuel Quantity Actuator Control Circuit

FAULT CODE DIAGNOSIS P1220/P1614/P0200 & P1223/P1614/P0200 (STEP 8.0-9.2)

P1222

P0220

IFI Accelerator Pedal Position Sensor

FAULT CODE DIAGNOSIS P1222/P0220 & P1705 (STEP 10.0-11.0)

P1223

P0200

Fuel Rack Position Sensor

FAULT CODE DIAGNOSIS P1220/P1614/P0200 & P1223/P1614/P0200 (STEP 8.0-9.2)

P1335

P0725

CKP Sensor

FAULT CODE DIAGNOSIS P1335/P0725 (STEP 7.0-7.1)

P1401

P0403

EGR Lifting Sensor

FAULT CODE DIAGNOSIS P1401/P0403 (STEP 29.0-30.1)

P1470

P0120

Pressure Control Flap Vacuum Transducer

FAULT CODE DIAGNOSIS P0400 & P1470/P0120 (STEP 31.0-32.0)

P1475

P0200

Resonance Intake Line Switchover Valve

FAULT CODE DIAGNOSIS P0600 & P1475/P0200 (STEP 25.0-26.1)

P1476

P0200

Resonance Intake Manifold Switchover Valve

FAULT CODE DIAGNOSIS P1476/P0200 (STEP 27.0-28.0)

P1480

P0380

Preglow Control

FAULT CODE DIAGNOSIS P1480/P0380 & P1480/P0380 (STEP 1.0-2.2)

P1520

N/A

Cruise Control Switch

FAULT CODE DIAGNOSIS P1520 & P0500 (STEP 14.0-15.0)

P1610

N/A

Voltage Supply Missing Or Relay Module

FAULT CODE DIAGNOSIS P1610 & P0115 (STEP 3.0-4.0)

P1611

P0200

IFI Control Module

FAULT CODE DIAGNOSIS P1220/P1614/P0200 & P1223/P1614/P0200 (STEP 8.0-9.2)

P1612

N/A

IFI Control Module Voltage (Circuit 15)

FAULT CODE DIAGNOSIS P1612 & P1615 (STEP 1.0-2.0)

P1613

P0200

IFI Control Module

FAULT CODE DIAGNOSIS P1220/P1614/P0200 & P1223/P1614/P0200 (STEP 8.0-9.2)

P1614

P0200

IFI Control Module, Fuel Metering Actuator Or Fuel Rack Position Sensor

FAULT CODE DIAGNOSIS P1220/P1614/P0200 & P1223/P1614/P0200 (STEP 8.0-9.2)

P1615

N/A

IFI Control Module Supply Voltage

FAULT CODE DIAGNOSIS P1612 & P1615 (STEP 1.0-2.0)

P1617

P0200

Control Module Or Not Coded

FAULT CODE DIAGNOSIS P1220/P1614/P0200 & P1223/P1614/P0200 (STEP 8.0-9.2)

P1622

P0200

Electrohydraulic Shut-Off Actuator

FAULT CODE DIAGNOSIS P1622/P0200 (STEP 22.0-22.2)

P1625

N/A

CHECK ENGINE Malfunction Indicator Light (MIL)

Fault Code Diagnosis P1625 (Step 17.0)

P1630

N/A

Drive Authorization Signal

P1705

N/A

Starter Lock-Out/Back-Up Light Switch

FAULT CODE DIAGNOSIS P1222/P0220 & P1705 (STEP 10.0-11.0)

P1780

N/A

Modulating Pressure Switchover Valve Or Upshift Delay Switchover Valve

P1781

N/A

Upshift Delay Switchover Valve

FAULT CODE DIAGNOSIS P1700 & P1781 (STEP 19.0-21.1)

⁽¹⁾	If no fault codes are displayed, there is no malfunction.

⁽²⁾	Fault code P0600 can be displayed even if no malfunction is present.