Steering -- 163 Chassis
- Diagnostic Trouble Code List
- General Information
- Safety Precautions
- Trouble Diagnosis
- Testing & Repair
- Testing and repair work: Passenger cars: Steering - AR46.00-Z-9163AA
- Removing and installing steering wheel - AR46.10-P-0100GH
- Set the clock spring contact to center position - AR46.10-P-0200-01GH
- Removing, installing contact spiral - AR46.10-P-0200GH
- Activating steering angle sensor - AR46.10-P-0300-01A
- Remove/install steering angle sensor rotor - AR46.10-P-0350GH
- Adjust installed position of lower steering shaft relative to jacket tube - AR46.10-P-0400-02GH
- Remove/install jacket tube - AR46.10-P-0400GH
- Remove/install lock cylinder - AR46.10-P-0800GH
- Remove/install steering wheel lock - AR46.10-P-0900GH
- Remove/install steering coupling - AR46.10-P-8000GH
- Disassemble/assemble mechanically adjustable casing tube - AR46.15-P-0550GH
- Turning rack-and-pinion steering to center position and fitting steering coupling - AR46.20-P-0600-01GH
- Remove/install rubber mount of rack-and-pinion fixing - AR46.20-P-0600-02GH
- Install rack-and-pinion steering to front axle carrier - AR46.20-P-0600-03GH
- Remove/install rack-and-pinion steering - AR46.20-P-0600GH
- Fill power steering pump and bleed - AR46.30-P-0010B
- Checking oil pressure of power steering pump - AR46.30-P-0100GH
- Removing and installing power steering pump - AR46.30-P-0500B
- Mount bracket for power steering pump oil cooler line - AR46.30-P-0510GH
- Pressing out and attaching track rod joint at steering knuckle - AR46.40-P-0200-02C
- Removing and installing tie rod - AR46.40-P-0200GH
- Remove/install inner tie rod with axial joint - AR46.40-P-0201GH
- Detaching and attaching inner clamp - AR46.40-P-0400-01GH
- Check and replace rubber boot - AR46.40-P-0400GH
- Maintenance
- Removal & Installation