Selector Lever Blocks In Position "P" (Brake Applied) (LI27.60-P-059296)
Publication date: 2014-06-30Reference number: LI27.60-P-059296
SELECTOR LEVER BLOCKS IN POSITION "P" (BRAKE APPLIED)
TECHNICAL SERVICE BULLETIN
Reference Number(s): LI27.60-P-059296 Version 1, Date of Issue:
June 30, 2014
| MERCEDES-BENZ: | Transmission 722.6 with touch shift in all model series |
| DESIGN GROUP: | 27.60 Gearshift, control |
COMPLAINT
The selector lever of the electronic selector lever module blocks in position "P", although the brake is applied.
CAUSE
Several causes come into consideration for this complaint:
- The brake pedal cannot be depressed far enough after the vehicle has stood for a longer period
- No signal from the stop lamp switch (check actual values in the electronic selector lever module using the DAS [Diagnosis Assistance System]
- Release mechanism in center shifter has malfunctioned, or electrical fault in electronic selector lever module
REMEDY
- Check vacuum system & repair any faults found. Explain to the customer to further depress pedal.
- Check stop lamp switch signal and repair as necessary.
- Replace center shifter console.
SYMPTOMS
SYMPTOMS
| Power transmission/Automatic transmission/Automatic transmission operation/Drive position selection/Function/Blocks |