Adjusting seats, function - GF91.29-P-2005GH

MODEL 163 

Function prerequisites 

• Switch-on conditions for convenience control fulfilled.
• Voltage not too low or too high

Adjusting driver's seat 

To adjust the driver's seat press the left front ESA switch (S22)  .

One of the motors M25m1, M25m2, M25m3  or M25m5  or is connected to circuit 30 via the actuated convenience relay (F1k14)  (as of 12.99: Relay 1 (F2k1)  ) depending on the switch position.

Adjusting passenger seat 

To adjust the passenger seat press the right front ESA switch (S23)  . One of the motors M26m1, M26m2, M26m3  or M26m5  is connected to circuit 30 via the actuated convenience relay (F1 k14)  (as of 12.99: Relay 1 (F2k1)  ) depending on the switch position.

One DC motor can be actuated for each of the following functions:

• Front height adjustment (front switch up/down)
• Fore/aft adjustment (fore/aft switch)
• Rear height adjustment (rearswitch, up/down)
• Backrest adjustment (backrest fore/aft switch)