LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mercedes Benz >> 2000 >> ML430 >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Combination Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Combination Switch: Removal

  1. Remove air bag module and steering wheel. See AIR BAG MODULE  and STEERING WHEEL  . Remove cover plate, containing SRS carbon brushes for air bag module deployment, from steering column and allow cover plate to hang loose. See Figure .
  2. Some models are equipped with Adaptive Damping System (ADS). These models will have a Hall Effect sensor cover plate that also must be carefully removed to access combination switch.
  3. Remove lower instrument panel cover below steering wheel. Unplug combination switch harness connector mounted to instrument panel, left of steering column. Remove combination switch attaching screws. Remove combination switch from column, using care to guide wiring through column housing cover.
scientia non olet · About LEMON Manuals